XCMG GR180 Motor Grader With Ripper, Cummines Engine, ZF Gearbox

Product Description

Motor Grader GR180 with ripper

Rated Power: 142kW/2,200rpm
Dimensions(LXWXH): 8,900mmX2,625mmX3,420mm
Operating Weigh: 15,400kg
Ground Clearance of Front Axle: 430mm
Tread of Front Axle: 2,156mm
Length from Front Axle to Mid Tandem: 6,219mm
Tread of Tandem Axle: 1,538mm

Travel Speed (Forward/Reverse): 0-38km/h / 0-23km/h
Max. Drawing Force: 79kN
Grade-ability: 25%
Tire Inflation Pressure: 260kPa
Working Hydraulic Pressure: 18MPa
Transmission Pressure: 1.3-1.8MPa

Front Wheel Steering Angle: ±50°
Front Wheel Leaning Angle: ±17°
Front Axle Oscillation Angle: ±15°
Tandem Oscillation Angle: 15° (Forward) / 15° (Backward)
Frame Articulation Angle: ±27°
Min. Turning Radius: 7,300mm

Moldboard Blade Width X Chord Height: 3,660mmX610mm
Maximum Blade Lift above Ground: 450mm
Maximum Blade Depth of Cut: 500mm
Maximum Blade Position Angle: 90°
Blade Cutting Angle: 28°-70°
Blade Rotary Angle: 360°
 

Standard equipment: Dongfeng-Cummins 6CTA8.3-C190-II. Turbocharged and inter-cooled diesel engine(142kw/2,200rpm, china stage ii emissions compliant), zf electro-hydraulic control countershaft power shift transmission with 6 forward shifts and 3 reverse ones, neutral starting protection, xcmg driving axles with hydraulic dual circuit service brake on 4 middle and rear wheels and no spin limited slip differential, parking brake system composed of the control unit and brake, implement hydraulic system composed of the oil tank, dual gear pump and two integrated 5-way valves, fully hydraulic steering system composed of gear pump, priority flow discharge valve, and fully hydraulic load-sensing steering unit, front wheel steering, working devices composed of the drawbar, integrated positioner, high-strength slewing bearing, standard moldboard blade, cabin with air conditioner, 17.5-25-12pr tires with tube

XCMG GR180 Motor Grader Technical Specification

XCMG GR180 motor grader with ripper