SAM388 Backhoe Loader with 1m3 bucket & 0.3m3 backhoe bucket in Kazakhstan

Product Description

SAM388 Backhoe Loader with 1m3 bucket & 0.3m3 backhoe bucket in Kazakhstan

Backhoe loaders are very common and can be used for a wide variety of tasks such as construction, minor demolition, light hauling of construction materials, powering construction equipment, digging/excavation, landscaping, crushing asphalt and paving. In many cases, backhoe buckets can also be replaced with power attachments such as crushers, grapples, augers and stump grinders. Intermediate attachments, such as tilt rotators, can be used to enhance attachment articulation. 

Features of 4*4 driving backhoe loader SAM388:

1. Yuchai engine, low noise, low emission, energy saving, green environmental protection, strong power, good reliability.

2. The transmission system adopts the mature supporting parts of 3-ton loader, with large safety coefficient.

3. Localization of the overall design, front and rear axle arrangement is reasonable, mobile and flexible, with outstanding loading and digging stability.

4. The valve-controlled belt-type emergency brake system and parking brake are two-in-one, which can automatically implement the emergency brake when the brake air circuit fails, making the emergency brake and parking brake safer.

5. The steering wheel and instrument panel can be adjusted up and down, forward and backward according to the operator's comfort, and the maneuvering handle is reasonably arranged and easy to operate; the seat can be adjusted up and down, forward and backward, and different damping effects can be selected according to different weights.
6. The rear axle can swing up and down around the center, so that the tires have good adhesion, and the whole machine has good cross-country performance and passing performance.

Technical Specification of SAM388 Backhoe Loader for Sale 

Components of backhoe loader SAM388 For Hot Sale in Kazakhstan

A backhoe loader consists of: powertrain, loading end, digging end, outrigger. Each machine is designed for a specific type of job. On a typical construction site, a backhoe operator usually needs to use all three components to get the job done.

1.The core structure of a backhoe loader is the powertrain. The powertrain of a backhoe loader is designed to run freely over a variety of rough terrain. Featuring a powerful turbocharged diesel engine, large, deep-toothed tires and a cab equipped with driving controls (steering wheel, brakes, etc.).

2. The loader is assembled at the front of the unit and the excavator is assembled at the back. These two components offer completely different functions. The loader can accomplish many different tasks. In many applications, you can think of it as a mighty big dustpan or coffee scoop. It is generally not used for digging, but primarily for picking up and moving large amounts of loose material. It can also be used to bulldoze soil like a plow, or to level the ground, like using a knife to spread butter on bread. The operator can drive the tractor and control the loader at the same time.

3. A backhoe is the primary tool of a backhoe loader. It can be used to excavate dense, hard materials (often soil) or to lift heavy materials (such as sewer box culverts). An excavator can lift these materials and stack them on the side of a hole. Simply put, an excavator is a huge, extremely powerful arm or finger, which consists of three parts: the arm, the bucket, and the bucket.

4. Other additional components that can typically be found on a backhoe loader include two stabilizing outrigger behind the rear wheels. These outriggers are vital to the operation of the backhoe. The outrigger absorb the shock of the weight as the backhoe performs the digging operation. Without stabilizer outrigger, the weight of heavy loads or the downward force from digging would damage the wheels and tires, and the entire tractor would constantly bounce. 

Two kinds of outriggers:

Middle Wing-Shaped Outrigger

H-Shaped Outrigger(With side shift function)